Aspire Flexus Stik Pod Kit

INSTRUCTIONS FOR USE:

Before starting your pod, press the button located underneath the pod three times to set the desired voltage. The voltage will vary depending on the color of the LED surrounding the base of the battery:

Green LED (High) power set between 3.8 and 4.2V

Blue LED (Mid) power set between 3.5 and 3.8V

Red LED (Low) power set to 3.5V

You can then place your lips directly on the drip tip and inhale in automatic mode, but you can also press the button located underneath while taking a puff – the choice is yours! By rotating the cartridge, you can adjust the air entering your pod.

To turn it on or off , quickly press the Fire button 5 times.

To charge your pod's built-in battery , plug the USB cable into the USB-C port located above the LED indicator. Charging is very fast, and the LED will light up green when the battery is between 60% and 100% charged. It is recommended to use the included USB-C cable for optimal charging.

Remaining charge level: 

Green LED indicates pod is recharged between 60% and 100%

Blue LED indicates pod is recharged between 30% and 60%

Red LED indicates pod is recharged between 0% and 30%

Other LED indicators:

The LED flashes 10 times in red and blue: puff time exceeds 10 seconds. The pod enters safety mode.

The LED flashes three times in red and blue: short circuit.

The LED flashes red 15 times: low voltage.

The LED remains yellow for 3 seconds: overheating.

To fill the cartridge, pull it out from the top of the pod. Turn the cartridge over and remove the silicone cap, then pour e-liquid into the opening (use e-liquids with a maximum of 50% vegetable glycerin for optimal vaporization). Replace the silicone cap and clip the cartridge back into your Flexus Stik pod. If the cartridge is correctly inserted, the LED will flash blue once.

To replace the coil, remove the detachable pod cartridge and unclip the used coil. Then clip the new coil into the cartridge. Securely clip the cartridge back into your Flexus Stik pod.

Warning! When using a new coil, regardless of your device model, you must first prime it. This means ensuring the coil is saturated with e-liquid to prevent burning the dry cotton. The easiest way is to wait at least 10 minutes after filling before using your e-cigarette. Other priming techniques are faster and safer.

PRECAUTIONS FOR USE: 

Keep the device out of reach of children and pets.

Use only the USB cable supplied by the manufacturer when updating firmware or charging.

Refill the cartridge before vaping, even if it is not completely empty, to avoid a dry hit.

Avoid using the Aspire Pod Flexus Stik kit in humid, dusty environments, or with extreme temperatures.

Do not use nicotine e-liquid if you are under 18 years of age, pregnant or breastfeeding, have cardiovascular disease or dysfunction, long-term respiratory problems (bronchitis, asthma), high blood pressure or diabetes, have an overactive thyroid gland or suffer from a pheochromocytoma, or are taking the medications Theophylline, Ropinirole or Clozapone.

To find out about possible side effects, contact the manufacturer.

TECHNICAL SPECIFICATIONS